Searched for "Vertical Turning Machines"

ticket Our Exhibits: The VTC 100 GT from EMAG combines hard turning and grinding for complete-machining in a single setup. VTC 100 GT – Hard turning and grinding of rotor shafts in a single setup The VTC 100 [...] 100 GT from EMAG enables complete-machining of rotor shafts by combining hard turning, Scroll free turning and grinding in a single setup. Bearing and seal ring seats are turned with precision and then [...] then ground to IT6 tolerances – with a surface finish of Rz 1–3 µm, free of tool marks. The vertical design ensures reliable chip removal, while integrated measuring and automation systems guarantee consistent

모듈형 파이프 가공 기계 – VT VT Series: Maximum Performance for Shaft Production 샤프트 가공에서 짧은 시간에 다량의 제품을 처리해야 하는 경우, 짧은 사이클 타임이 중요합니다. 가공 공정뿐만 아니라 로딩/언로딩도 매우 빠르게 진행되어야 합니다. VT 2 및 VT 4 기계가 이러한 최고의 성능을 보장합니다. 개요

more information VL 3 DUO VT 4 Combined turning and scroll-free turning of hardened rotor shafts in a single setup. MORE InformatioN VT 4 VM 9 Vertical turning machine for large workpieces for versatile [...] Isidro Business Park, 76223 Santa Rosa de Jáuregui, Querétaro, Mexico Highlights of the factory tour Turning Solutions – VL 4 & VL 6 Manufacturing Systems, VL 3 DUO, VM 9, VT 4 Grinding Solutions – WPG 7 Gear [...] experience a day full of highlights, innovations and exciting encounters! Register now! Featured Machines: VL 4 & VL 6 Manufacturing Systems High-precision soft machining of rotor shafts with innovative

공작물 직경: mm/in 160/6,5* Ball diameter max.: 30 mm | 1 in 문의 사항 보내기 Double-spindle vertical spherical milling and turning center - VSC 315 DUO KBU The VSC 315 DUO KBU sets new standards in efficiency and [...] journals, joint rings) and ball hubs (joint hubs), it combines the technologies of soft turning, soft milling, hard turning and hard milling and enables the machining of the workpieces in one setup. Double-spindle [...] thus reliable product quality. Exterior view of the VSC 315 DUO KBU, double-spindle vertical spherical milling and turning center The work area of the VSC 315 DUO KBU during pre-milling of the ball raceway

The focus of our trade show presentation will be on two machines that deliver high productivity with a minimal footprint: the VL 4 vertical turning machine with integrated pick-up automation and the WPG [...] non-productive time to a minimum. Vertical turning with integrated automation – High-volume production of chucked components in a compact footprint The VL 4 vertical lathe combines compact dimensions, [...] 홈 회사 이벤트 및 웨비나 이벤트 EMAG at MAKTEK Eurasia 2026: Compact machining solutions for turning and grinding High-productivity machining of small workpieces - with the smallest footprint. From September 28 to

30 mm | 1 in 문의 사항 보내기 Vertical single spindle ball nose milling and turning center - VSC 315 KBU The EMAG VSC 315 KBU is a vertical single-spindle ball track milling and turning center for machining ball [...] journals, joint rings) and ball hubs (joint hubs) Work area of the VSC 315 KBU with turning machining. Both turning and milling are performed in one setup, ensuring optimum production quality. Soft milling [...] swivel unit (B axis), driven by a torque motor; the swivel angle here is -30° to +90°. The use of turning tools is also possible. The machine is designed with a large Y-axis stroke and a total of three axes

lathes from the VL platform with gear hobbing and grinding machines to form compact production lines. This allows all operations - from turning the blank to gear hobbing and hard finishing - to be integrated [...] ly consists of four steps: turning the blank, rough-machining the tooth profiles, hardening, and hard finishing. In the first step, the gear blanks are machined on vertical lathes. This is followed by [...] planetary gears – the powertrain places the highest demands on precision and efficiency. EMAG offers machines, technologies, and automation solutions tailored to every gear component, all from a single source

similarly efficient and sustainable. The SG 160 from EMAG SU is particularly impressive. It machines turning blanks in a completely dry process that combines hobbing and gear generating grinding in a single [...] presenting at the AMB, offers a similar combined machining operation. With these machines, different technologies such as hard turning, internal and external grinding, milling, reaming, or honing can be combined [...] machining of large components for commercial vehicles A literally large solution in the field of vertical turning is the VSC 500, which EMAG will demonstrate live at the AMB – a platform for the production

machining of chucked components up to 350 mm in diameter. Hard turning, grinding, and power skiving are combined in one machine. VLC 350 GT – Turning and power skiving of circular splines for shaft transmissions [...] with four axes simultaneously. Integrated automation ensures minimal downtime. VT 2-4 – Vertical 4-axis shaft turning machine for rotor shaft production Rotor shafts for electric motors require short cycle [...] machine tool trade fairs in Asia. Under the theme "Technology. Connected.", EMAG will present five machines that are specifically designed to meet the requirements of humanoid robotics, electromobility, and

its 150th anniversary six years ago, more than 12,500 pick-up turning machines, 4,300 grinding machines and 2,350 gear cutting machines are already in operation at customers' sites worldwide. The anniversary [...] position as technical Manager at EMAG and is realigning the company: High-performance, automated machines are a primary goal. When it became apparent that SÜKO was going to sell EMAG in 1975, Norbert Heßbrüggen [...] downturn, the visionary managing director has the idea of a multi-functional pick-up machine whose vertical work spindle can be moved in the main axes. The movement is thus in the workpiece, while the tool

생산성을 보장합니다. 다. VLC 400 Vertical Turning Machine for the Productive Machining of Large Chucked Parts VLC 400 Vertical Turning Machine - Workarea The VLC 400 vertical pick-up turning machine gives the user [...] machining technologies. Whether turning or milling, drilling or grinding – the user has access to the wide technology portfolio of the EMAG Group. The VLC 400 is a vertical turning machine allows machining of [...] this is what is promised by the new stacking cells of the SCS series in combination with the vertical turning center from EMAG. Whether for the… 상세 정보 TrackMotion TrackMotion 자동화 시스템에서는 소위 TransLift(운송

liable For the production of 120 mm mortar ammunition, EMAG combines the VT 4 and VL 8 vertical turning machines with the TrackMotion automation system to form a compact production line. The shell is machined [...] ammunition and artillery shells to gun barrels Bundled technological expertise from a single source: vertical turning, ECM, TrackMotion automation At SAHA 2026, our team will be happy to meet with you for personal [...] two setups with a minimal footprint. For machining 155 mm artillery shells, the USC 850 horizontal turning machine is used, featuring a generous machining area, high spindle rigidity, and a flexible turret

| 6.5 in Ball diameter max.: 30 mm | 1 in 문의 사항 보내기 VSC 315 TWIN KBG two-spindle vertical spherical milling and turning center The VSC 315 TWIN KBG was specially designed for hard machining of straight [...] a Single Source thanks to a High Range of Technologies Hard turning / grinding The combination of a number of processes – such as hard turning and grinding – on a single machine, allows for the exploitation [...] Sales & Service EMAG Newsletter Subscribe to our newsletter now and receive information about our machines, technologies and webinars. Subscribe now!

series in combination with the vertical turning center from EMAG. Whether for the machining of chuck parts or shaft parts, in combination with the SCS stacking cells, EMAG machines become compact, fully automated [...] highly efficient production with EMAG machines from a single source. 이점 SCS Stacking Cell Perfect solution for machines of the VL and VT series and hobbing machines of the K series from EMAG Koepfer Compact [...] EMAG ensure continuous material flow in your production with EMAG machines. The systems enable fast loading and unloading of the machines as if your production is never at a standstill. The SCS automation

has a vibration-damping effect on the process. Vertical and horizontal hobbing machines from EMAG SU Vertical hobbing machines The vertical hobbing machines can be equipped with an NC-controlled 2- or 4-station [...] can thus be produced cost-effectively on these machines. More information Horizontal hobbing machines Thanks to the horizontal workpiece axis, these machines offer outstanding set up possibilities. They [...] or also for worms and rotor milling. On the machines, both dry machining and wet machining with emulsion or oil cooling lubricant are possible. All machines are CNC-controlled and are equipped with a directly

| 47 in Workpiece length, min.: 50 mm | 2 in 문의 사항 보내기 ELC 1200 V Vertical Laser Processing Machine for Shaft Components The vertical laser processing machine ELC 1200 V is designed for workpieces up to [...] processes such as laser cleaning and laser hardening can be used on this new machine. ELC 1200 V Vertical Laser Processing Machine with EDNA HMI for easiest operation The ELC 1200 V offers maximum flexibility [...] course, just as flexible as the laser lens. Highlights: Designed for simple workpieces/processes Vertical workpiece clamping Workpiece lengths between 50 mm and 1,200 mm One or more welds Flexible due to

The EMAG VSC 315 KBU is a vertical single-spindle ball track milling and turning center for machining ball tracks in joint housings (axle journals, joint rings) and hubs (joint hubs). complete-machining [...] swivel unit (B axis), driven by a torque motor; the swivel angle here is -30° to +90°. The use of turning tools is also possible. The machine is designed with a large Y-axis stroke and a total of three axes

Information EMAG turning solutions: the VL 3 DUO. The VL 3 DUO turns chucked parts on two spindles with TrackMotion automation. EMAG Turning Solutions – twin-spindle chucked-part and shaft turning, ready for [...] facility. On Wednesday, October 14, 2026, starting at 10:00 a.m., you’ll find our machines running live across turning, grinding, gear, ECM, and laser technologies, with vendor partners on hand and our [...] for automation Our turning lineup covers both chucked components and shafts in compact, automation-ready machines. The VL 3 DUO turns chucked parts on two spindles from a small footprint, so you get more

Under the brand Samputensili CLC, horizontal gear hobbing machines for shafts and long workpieces are produced, as well as vertical shaping machines. The solutions are powerful, have a modular design and [...] parts for Samputensili machines will be manufactured at EMAG’s production site in Zerbst – one of the most sophisticated tool factories in Europe. The final assembly of machines will remain in northern [...] CLC, a traditional manufacturer of hobbing and shaping machines. Since then, the new company has been producing gear hobbing and shaping machines in Cadelbosco di Sopra in the area of Reggio Emilia. S

cylindrical grinding machines, ranging from classic conventional cylindrical grinding machines to high-tech CNC cylindrical grinding machines. Weiss is now showing two of these machines at GrindingHub: a [...] customers to enter the world of data-optimized production, machines can now be delivered IoT-Ready. This makes it possible to integrate the machines directly and without major effort into existing IoT networks [...] is then installed in the control cabinet of the machines, which is already fully installed and networked with the machine control. In addition, the machines can be equipped with the EDNA Neuron 3DG sensors

the end, they were convinced by EMAG's VL 2 and VL 3 DUO machines. In this whitepaper you will learn why the company AccuRounds chose EMAG machines to increase tool life and to improve component quality [...] EMAG’s customer AccuRounds machines cylindrical components, often from difficult-to-machine alloys like Inconel, which has a high nickel content. AccuRounds’ relationship with EMAG began when they sought [...] sought to solve a problem with chip evacuation during turning and milling processes. Increasing demand for precision components in the marketplace pushed them to purchase equipment with newer technology. In

German specialists at EMAG compared the energy requirements of the three processes "hard turning", "scroll-free turning" and "grinding", whereby the same component was machined with the same objective in each [...] different. For example, 663 J/mm 3 is required for grinding, 220 J/mm 3 for hard turning and only 57 J/mm 3 for scroll-free turning. In other words, it is important to keep the energy requirement in mind when [...] not only focus on the development of new machines, as various customer examples under the heading "Retrofit" make clear. "The energy efficiency of older machines is not an immovable status quo. On the contrary

A robot arm picks a workpiece from a container and places it on the conveyor belt of a VL 4 vertical turning machine. The Bin Picking automation solution The MRC robot cell offers advanced bin-picking [...] central role in the link-up of several processing steps. They transport workpieces between different machines and thus enable a smooth, automated production process. The MRC robot cell offers the option of [...] Sales & Service EMAG Newsletter Subscribe to our newsletter now and receive information about our machines, technologies and webinars. Subscribe now!

the component is given a chamfer. Flow-turning deburring Flow-turning deburring is a forming process. With this process, the chamfer is formed using a flow-turning deburring tool and the burr on the face [...] hob or side milling cutter We only offer this procedure as a combination solution on the hobbing machines in the 90° position of the 4-station ring loader. Here a milling cutter is used to deburr and chamfer [...] Sales & Service EMAG Newsletter Subscribe to our newsletter now and receive information about our machines, technologies and webinars. Subscribe now!

4 transfer the raw parts into the turning center and pick them up again after machining, reducing chip-to-chip times as well as related component costs. The vertical arrangement of the component also ensures [...] ensures long-lasting process reliability using the VT 4 vertical turning center, since gravity assists chip flow, helping avoid chip build-up in the machine compartment. 이점 VT 4 / VT 200 4 축 제어로 줄어든 사이클 [...] this is what is promised by the new stacking cells of the SCS series in combination with the vertical turning center from EMAG. Whether for the… 상세 정보 TrackMotion TrackMotion 자동화 시스템에서는 소위 TransLift(운송